Buy Level Indicator Transmitter Factory – SUP-RD905 Solid material radar level meter – Sinomeasure
Buy Level Indicator Transmitter Factory – SUP-RD905 Solid material radar level meter – Sinomeasure Detail:
-
Specification
| Product | Radar level meter |
| Model | SUP-RD905 |
| Measure range | 0-30 meters |
| Application | Solid particles, powder |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~250℃ |
| Process Pressure | -0.1～4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange) |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | 2-wire（DC24V）/ 4-wire（DC24V /AC220V） |
-
Introduction
-
Product Size
-
Installation guide
 |
 |
 |
| Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Buy Level Indicator Transmitter Factory – SUP-RD905 Solid material radar level meter – Sinomeasure , The product will supply to all over the world, such as: Liberia, Malawi, Morocco, We are eager to cooperate with foreign companies which care much on the real quality, stable supply, strong capability and good service. We can offer the most competitive price with high quality,because we are much MORE PROFESSIONAL. You are welcomed to visit our company at any time.
By Griselda from Sydney - 2017.09.22 11:32
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Gladys from Manchester - 2018.09.29 17:23
