Buy Portable Ultrasonic Flow Meter Price Factory – SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure
Buy Portable Ultrasonic Flow Meter Price Factory – SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure Detail:
-
Measuring principle
Vortex flow meter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. As shown in below illustration, medium flows through bluff body and then vortex is generated, vortices are alternately formed on both sides with opposite directions of rotation, Vortices frequency is directly proportional to medium velocity. Through numbers of vortices that is measured by sensor head, medium velocity is calculated, plus flow meter diameter, final volume flow come out.
-
Installation
Wafer connection: DN10-DN500(priority PN2.5MPa)
Flange connection: DN10-DN80(priority PN2.5MPa)DN100-DN200(priority PN1.6MPa)DN250-DN500(priority PN1.0MPa)
-
Accuracy
1.5%, 1.0%
-
Range Ratio
8:1
-
Medium Temperature
-20°C ~ +150°C、-20°C ~ +260°C、-20°C ~ +320°C、-20°C ~ +420°C
-
Power Supply
24VDC±5%
Li battery(3.6VDC)
-
Output signal
4-20mA
Frequency
RS485 communication (Modbus RTU)
-
Ingress protection
IP65
-
Body Materials
Stainless stell
-
Display
128*64 dot matrix LCD
Noted: the product strictly prohibited to be used in explosion-proof occasions.
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Buy Portable Ultrasonic Flow Meter Price Factory – SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure , The product will supply to all over the world, such as: USA, United States, Karachi, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Myra from Estonia - 2018.06.19 10:42
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Ivy from America - 2017.11.20 15:58