Buy Ultrasonic Water Tank Level Meter Factory – SUP-RD905 Solid material radar level meter – Sinomeasure
Buy Ultrasonic Water Tank Level Meter Factory – SUP-RD905 Solid material radar level meter – Sinomeasure Detail:
-
Specification
Product | Radar level meter |
Model | SUP-RD905 |
Measure range | 0-30 meters |
Application | Solid particles, powder |
Process Connection | Thread, Flange |
Medium Temperature | -40℃~250℃ |
Process Pressure | -0.1~4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange) |
Accuracy | ±10mm |
Protection Grade | IP67 |
Frequency Range | 26GHz |
Signal Output | 4-20mA (Two-wire/Four) |
RS485/Modbus | |
Power supply | 2-wire(DC24V)/ 4-wire(DC24V /AC220V) |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
Product detail pictures:
Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Buy Ultrasonic Water Tank Level Meter Factory – SUP-RD905 Solid material radar level meter – Sinomeasure , The product will supply to all over the world, such as: Myanmar, Las Vegas, Nepal, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Nicole from Ukraine - 2017.12.19 11:10
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Melissa from Chicago - 2018.09.08 17:09