OEM Supply Water Level Probe - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure
OEM Supply Water Level Probe - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure Detail:
-
Specification
Product | Radar level meter |
Model | SUP-RD901 |
Measure range | 0-10 meters |
Application | Corrosive liquid |
Process Connection | Thread, Flange |
Medium Temperature | -40℃~130℃ |
Process Pressure | -0.1~0.3MPa |
Accuracy | ±5mm(Less than 5 m) / ±10mm (5~10 m) |
Protection Grade | IP67 |
Frequency Range | 26GHz |
Signal Output | 4-20mA |
RS485/Modbus | |
Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Product detail pictures:
Related Product Guide:
Our advantages are reduced prices,dynamic product sales workforce,specialized QC,solid factories,superior quality services for OEM Supply Water Level Probe - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure , The product will supply to all over the world, such as: Kuwait, Mauritius, US, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Althea from Mauritania - 2017.12.09 14:01
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Gustave from Buenos Aires - 2018.06.19 10:42