OEM/ODM Factory Water Level Sensor Working - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure
OEM/ODM Factory Water Level Sensor Working - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure Detail:
-
Specification
Product | Radar level meter |
Model | SUP-RD901 |
Measure range | 0-10 meters |
Application | Corrosive liquid |
Process Connection | Thread, Flange |
Medium Temperature | -40℃~130℃ |
Process Pressure | -0.1~0.3MPa |
Accuracy | ±5mm(Less than 5 m) / ±10mm (5~10 m) |
Protection Grade | IP67 |
Frequency Range | 26GHz |
Signal Output | 4-20mA |
RS485/Modbus | |
Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
Be installed in the diameter of the 1/4 or 1/6. The minimum distance from the tank wall should be 200mm.
Note: ① datum ②The container center or axis of symmetry
The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom
A feed antenna to the vertical alignment surface. If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface.
Product detail pictures:




Related Product Guide:
Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for OEM/ODM Factory Water Level Sensor Working - SUP-RD901 Radar level meter for corrosive liquid – Sinomeasure , The product will supply to all over the world, such as: Lyon, Belize, Algeria, On today, we've got customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to deliver the highest quality products with best price. We've been looking forward to doing business with you!

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
