PriceList for Clamp On Ultrasonic Flow Meter - SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure
PriceList for Clamp On Ultrasonic Flow Meter - SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure Detail:
-
Measuring principle
Vortex flow meter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. As shown in below illustration, medium flows through bluff body and then vortex is generated, vortices are alternately formed on both sides with opposite directions of rotation, Vortices frequency is directly proportional to medium velocity. Through numbers of vortices that is measured by sensor head, medium velocity is calculated, plus flow meter diameter, final volume flow come out.
-
Installation
Wafer connection: DN10-DN500(priority PN2.5MPa)
Flange connection: DN10-DN80(priority PN2.5MPa)DN100-DN200(priority PN1.6MPa)DN250-DN500(priority PN1.0MPa)
-
Accuracy
1.5%, 1.0%
-
Range Ratio
8:1
-
Medium Temperature
-20°C ~ +150°C、-20°C ~ +260°C、-20°C ~ +320°C、-20°C ~ +420°C
-
Power Supply
24VDC±5%
Li battery(3.6VDC)
-
Output signal
4-20mA
Frequency
RS485 communication (Modbus RTU)
-
Ingress protection
IP65
-
Body Materials
Stainless stell
-
Display
128*64 dot matrix LCD
Noted: the product strictly prohibited to be used in explosion-proof occasions.
Product detail pictures:
Related Product Guide:
We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for PriceList for Clamp On Ultrasonic Flow Meter - SUP-LUGB Vortex flowmeter with temperature & pressure compensation – Sinomeasure , The product will supply to all over the world, such as: Ottawa, Kazakhstan, Zurich, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Heather from Benin - 2017.03.28 16:34
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Salome from Islamabad - 2018.09.08 17:09