Short Lead Time for Gas Flow Meter Price - SUP-LDG-C Electromagnetic flow meter – Sinomeasure
Short Lead Time for Gas Flow Meter Price - SUP-LDG-C Electromagnetic flow meter – Sinomeasure Detail:
-
Specification
Product: Electromagnetic flow meter
Model: SUP-LDG-C
Diameter nominal: DN15~DN1000
Nominal pressure: DN6 – DN80, PN<4.0MPa; DN100 – DN150, PN<1.6MPa; DN200 – DN1000, PN<1.0MPa; DN1200 – DN2000, PN<0.6MPa
Accuracy: ±0.3%，±2mm/s(flowrate<1m/s)
Repetitiveness: 0.15%
Liner material: PFA, F46, Neoprene, PTFE, FEP
Electrode material: Stainless steel SUS316, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Medium temperature: Integral type: -10℃~80℃; Split type: -25℃~180℃
Power supply: 100-240VAC，50/60Hz / 22VDC—26VDC
Electrical conductivity: IP65, IP68(optional)
Product standard: JB/T 9248-2015
-
Measuring principle
Mag meter works based on Faraday’s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube
-
Description
Noted: the product strictly prohibited to be used in explosion-proof occasions.
-
Automatic calibration line
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Short Lead Time for Gas Flow Meter Price - SUP-LDG-C Electromagnetic flow meter – Sinomeasure , The product will supply to all over the world, such as: Rwanda, Auckland, venezuela, we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Natividad from Wellington - 2018.10.31 10:02
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Ivan from Rome - 2017.11.01 17:04
